We are giving you an opportunity to purchase 1 L of Litho fin MN Polish at only £36.00Incl Vat
For occasional and polishing of stone surfaces, provides gloss and protection. Takes care of all polished surfaces, and maintains their beautiful appearance.
We are giving you an opportunity to purchase 1 L of Litho fin MN Polish at only £36.00Incl Vat
For occasional and polishing of stone surfaces, provides gloss and protection.
Takes care of all polished surfaces, and maintains their beautiful appearance.
• Drying Time: approx. 60 minutes.
• Coverage: approx. 15 to 20m² per litre depending on the surface.
• Easy to polish • contains no solvent, CFC-free • for indoor use only
• Packaging: 1L
Description
A special product from the LITHOFIN-Range for marble,
natural and engineered stone (MN). Solvent based
polishing liquid containing high quality waxes.
Note: Litho fin MN Polish (liquid) does not contain any
environmentally problematic trichlorethen or similar
solvents.
Technical Data:
Density: approx. 0,80 g/cm³
Appearance: liquid, colourless, clear
Odour: aromatic
pH-Value: n.a.
Flash Point: >23°C
Solubility in Water: not soluble
Field of Use
For the initial treatment of natural and engineered stone.
Improves the appearance of the surface while protecting
it. Can also be used to touch up matt and dull spots.
Surfaces: all finely honed and polished natural stones
such as marble, limestone, travertine, slate, granite, etc.
as well as engineered stone, agglo marble and terrazzo.
Directions for Use
Shake bottle before use. Thinly and evenly apply Lithofin
MN Polish (liquid) with a clean cloth and allow the
product to dry. Then polish with a soft linen cloth or
polishing pad. Highly absorbent surfaces may have to be
treated more than once.
Please Note: the surface to be treated must be
completely clean and dry. Protect surfaces sensitive to
solvents. Lithofin MN Polish (liquid) is suitable for indoor
use only. Well honed surfaces are a prerequisite for good
results. In case the application is patchy, polish off with
steel wool (ooo).
Layer forming products affect the slip resistant properties
of the surface. We highly recommend trying the product
in an inconspicuous area prior to use.
Lithofin MN Polish (liquid) can be removed with Lithofin
MN Power-Clean or in extremely stubborn cases with
Lithofin WAX-OFF.
On smaller surfaces, use Lithofin MN Polish Cream.
Application Temperature: the temperature of the surface
should be between 10°C and 30°C. Switch off under floor
