We are giving you an opportunity to purchase 750gram of Lithofin MPP Cream Polish at only £34.00Incl Vat

(Oxalic acid based) For touching up dull areas and renewing the natural polish of calcium-containing natural stone i.e. marble, limestone, etc. Can be machine-polished to high gloss. Not suitable for granite, gneiss and similar hard stones.

Coverage: up to 40 m²/kg
Packaging: 750g

Description

A special LITHOFIN-Product formulated for the professional user. Litho fin MPP is a polishing powder based on oxalates and special additives.

Technical Data:

Apparent Density: 0,85 g/cm³

pH-Value n.a. in Water: < 2

Appearance: powder, white

Odour: pungent

Flash Point: n.a.

Properties

Lithofin MPP transforms calcium particles in the surface of the stone, making them easy to polish. The polish isrenewed and the surface once again has a high gloss finish.

Field of Use

For touching up dull patches and for renewing worn offpolishes on marble, travertine and other calcium containing stones such as carrara, thassos, ajax, etc. as well as terrazzo and agglo marble.

Not suitable for granite, quartzite, artificial stone, etc.

Directions for Use

Preparation: The surface to be treated must be clean and free of polymers, acrylates and wax layers.  Use Lithofin MN Power- Clean or Lithofin WAX-OFF to thoroughly clean the surface. M For touching up small surfaces or patches it is possible to polish by hand. This will only lead to a lower level of  gloss; it is preferable to use a polishing machine. On smaller surfaces we recommend polishing machines with approx.1000 rpm. For floors, a one disc polishing machine with approx. 140 to

180 rpm, 40 to 50 kg, pressure of approx. 0,37 N/cm² to 0,52 N/cm² is necessary. Always use a white nylon polishing pad. Optimal results can be achieved on surfaces with a 300 to 400 polish. Treat

larger surfaces in segments of approx. 10 to 15m².

Execution: Wet the surface with plenty of water. Spread a small quantity of Lithofin MPP and immediately start polishing. When the product turns pasty, add some water and continue polishing until the desired gloss level is reached. Then

immediately rinse the surface with Lithofin MN Power-Clean diluted 1:10 to 1:20 and remove the solution with a wet and dry vac or cloth. Do not allow any product residues to remain on the surface.

Advice: it may be advisable to wet the surface with Lithofin MN Power-Clean rather than with water. This reduces the risk of matt stains due to splashes on already polished surfaces. On small areas, Lithofin MPP can be mixed with Lithofin MN Power-Clean to form a paste, which is easier to use.

Please Note: sensitive surfaces such as wood, parquet, carpets, etc. must be protected against splashes. Some types of stone difficult to polish. Always try the product in an inconspicuous area prior to use. Deep scratches can not be removed. Coverage: approx. 30m² per 750g.