Lithofin MN Stain Stop Expected Wear 16 Years

Lithofin MN Stain-Stop

This special impregnation optimally protects absorbent, stain-sensitive natural and artificial stone surfaces against staining. Largely prevents penetration of oil, grease and water and makes further maintenance easier. Highly recommended in kitchen and bathroom. No health concerns once dry, according to FMPA report.

• Also for polished surfaces

•Advanced Water-Based Formula

•Lasts up to 15 Years

•Maintains the look of natural stone and porous tile

•Excellent grout sealer

• ready for use
• for indoor and outdoor use
• no gloss
• effective for many years
• contains solvents
•Coverage: approx. 7-15m²/L

Description

A special product from the LITHOFIN-Range for marble, natural

and engineered stone (MN).

Lithofin MN Stain-Stop contains high quality water and oil

resistant components based on alkoxysilanes.

Properties

Lithofin MN Stain-Stop penetrates into the surface and coats

the capillaries with an extremely thin, invisible film. Oil, grease

and water are not absorbed by the surface, but remain on the

surface (12 to 36 hours on polished marble and limestone, up to

48 hours on granite and gneiss). During this time, oil can easily

be removed without leaving stains. The effectiveness depends

on the amount of product absorbed by the surface.

The appearance of the natural stone is not affected. Some

stones may become slightly darker in colour. The water

absorbency of the stone is greatly reduced; the water

permeability is only slightly affected. The product is UV-resistant

and does not yellow.

Technical Data:

Density: approx. 0,8 g/cm³ Flash Point: about 32°C

Appearance: colourless Odor: aromatic

Reduction of water absorbency: approx. 90-95%

Permeability: approx. 80 to 90%