We are giving you an opportunity to purchase 1lt Lithofin MN Cobble Waxat only £32.00Incl Vat
For finishing treatment of antique marble floors with sandblasted or similarly processed surface
We are giving you an opportunity to purchase 1lt Lithofin MN Cobble Wax
at only £32.00Incl Vat
For finishing treatment of antique marble floors with sandblasted or similarly processed surface. Also suitable for later care of waxed antique marble surfaces. Creates hardwearing film, creates a richly coloured, shiny appearance, makes the surface less sensitive and simplifies maintenance.
• Ready for use • easy to polish • for indoor use only • contains solvents, CFC-free
Description
A special product from the LITHOFIN-Range for marble
and natural stone (MN). It is a ready-to-use wax system in
paste form and contains natural and synthetic wax raw
materials, which form a hard-wearing film.
Properties
Lithofin MN Cobble Wax is a solid paste, which is easy to
apply and spread. It forms a surface wax layer, which can
be polished when dry, and gives the background a coloursaturated,
silky shine appearance. The surfaces are also
less sensitive, easier to maintain and are made more
attractive.
Technical Data
Density: 0.80 g/m³
pH-Value: n/a
Flashpoint: approx. 39°C (c.C)
Appearance: yellow-beige, solid
Odour: aromatic
Field of Use
For final treatment of floors in antique cobbled marble with
sand-blasted, acid or similarly treated surface. To improve
resistance to stains the surfaces may also be pre-treated
with Lithofin MN Stainstop.
Treatment results in a strong-colour, antique effect
appearance. Lithofin MN Cobble Wax is also used for
maintaining already waxed surfaces. It is not suitable for
polished or sealed surfaces, or for external use.
Surface Requirements
The surface must be completely dry, clean, free of stains
and absorbent. Cement films can be removed with Lithofin
CEMENT-AWAY or Lithofin MN Builder’s Clean. The
roughing up or opening of pores which occurs because of
this makes it easier for the wax to penetrate. Any powdery
lime deposits can if necessary be removed mechanically
with a hard pad.
Pre-treatment with Lithofin MN Stain-Stop is possible, to
improve resistance to stains. In this case apply Lithofin
MN Cobble Wax immediately after about 1-2 hours drying
time. The temperature of the surface must not be below
12oC.
Directions for Use
We strongly recommend applying a sample surface. This
shows what the result will be, and gives information on
how much to apply, drying time etc.
Lithofin MN Cobble Wax is ready to use and can be
worked directly out of the tin. Particularly with more
impervious surfaces, it should be warmed up in a waterbath
to liquefy it more. The fluid, warm wax will penetrate
more deeply and give greater deepening of colour. Apply
evenly and thinly, spread and rub in with a fluff-free cloth.
You may need to apply treatment twice with strongly
absorbent, porous backgrounds. Polish with a brush or
